User Manual

6 / 124
Siemens Synco™ living CE1C2707en
Building Technologies Contents 23.08.2008
Connect outputs for the step selector .......................................... 64
Connect outputs for the HR bypass ............................................. 64
Connect DHW components................................................................ 65
Connect the input for the DHW sensor ........................................ 65
Connect the output for the DHW pump / valve ............................ 65
Connect the output for the electric immersion heater .................. 66
Connect meteo sensor ....................................................................... 66
Connect lighting and blinds actuators ................................................ 67
Connect RF adapter plugs KRF960 and KRF961........................ 67
Connect GAMMA wave actuator.................................................. 68
Connect the switching group relay ..................................................... 68
Connect door contacts ....................................................................... 68
Connect temperature sensor.............................................................. 69
Connect fault Inputs ........................................................................... 69
Connect fault outputs ......................................................................... 70
Connect inputs ................................................................................... 70
Connect inputs for operating mode contact ................................. 70
Connect input for summer operation............................................ 71
Connect input for heating / cooling changeover........................... 71
Connect input for absence ........................................................... 72
Connect the input for twilight........................................................ 72
Connect outputs ................................................................................. 73
Connect the output for heat demand DC 0..10 V......................... 73
Connect the heat demand relay................................................... 73
Connect the output for summer operation ...................................74
Connect the status output ............................................................ 74
Connect the window / door state output....................................... 75
Connect the output for exhaust hood........................................... 75
Connect Hager tebis devices ............................................................. 76
Number inputs.............................................................................. 76
Connect RF repeaters ........................................................................ 76
Assign devices to RF repeaters ................................................... 77
Connecting RF adapter plugs KRF960 and KRF961................... 78
Connecting GAMMA wave actuators ........................................... 78
Testing radio connections......................................................................... 78
Wiring test.................................................................................................79
Removing devices .................................................................................... 80
Displaying the device list by function........................................................ 81
Displaying the device list with all devices .................................................82
Remove devices from the device list.................................................. 82
Bus communication .................................................................................. 83
Device address KNX TP1................................................................... 83
Bus power supply ............................................................................... 83
Programming mode............................................................................ 83
Clock time operation........................................................................... 84
Remote setting clock slave................................................................. 84
Calendar zone (holidays and special days) ....................................... 84
DHW zone .......................................................................................... 85
Set the distribution zone.....................................................................85
Quitting the “Commissioning“ menu ......................................................... 86