User Manual

48 / 124
Siemens Synco™ living CE1C2707en
Building Technologies Commissioning the system 23.08.2008
Cooling release output
State how the cooling release output of the respective room is controlled.
--- Inactive – cooling release output not required
Via RF / S-Mode Cooling release output via:
• Relay output Qx of an RRV91.. heating circuit
controller or RRV934 multi-controller
• RF adapter plug KRF960
• S-Mode object on KNX TP1 *
Q1 (local) Use relay Q1 of the central apartment unit as a
cooling release output
* Connection of the respective S-Mode objects of the central apartment unit to the relevant S-Mode
devices on KNX TP1 is made with the help of a commissioning tool (ETS).
Main menu > Commissioning > Extra configuration
> Rooms > Room X > Cooling release outp:
Room Factory setting Your setting
1 ---  ---
 Via RF / S-Mode
 Q1 (local)
2 ---  ---
 Via RF / S-Mode
 Q1 (local)
3 ---  ---
 Via RF / S-Mode
 Q1 (local)
4 ---  ---
 Via RF / S-Mode
 Q1 (local)
5 ---  ---
 Via RF / S-Mode
 Q1 (local)
6 ---  ---
 Via RF / S-Mode
 Q1 (local)
7 ---  ---
 Via RF / S-Mode
 Q1 (local)
8 ---  ---
 Via RF / S-Mode
 Q1 (local)
9 ---  ---
 Via RF / S-Mode
 Q1 (local)
10 ---  ---
 Via RF / S-Mode
 Q1 (local)
11 ---  ---
 Via RF / S-Mode
 Q1 (local)
12 ---  ---
 Via RF / S-Mode
 Q1 (local)