User Manual

47 / 124
Siemens Synco™ living CE1C2707en
Building Technologies Commissioning the system 23.08.2008
Main menu > Commissioning > Basic configuration
> Miscellaneous > 2-pipe H/C system:
Factory setting No
Your setting  Yes
 No
Extra configuration
Extra configuration is used to assign the individual rooms to a room group. In
addition, it is possible to define for each room how the cooling release output
is controlled.
In addition, extra configuration facilitates coding of the ventilation stages and
definition of the ventilation inputs and outputs.
Rooms
Assign rooms to room groups
Per default, all 12 rooms are assigned to room group 1. For this room group, a
common flow temperature is calculated.
You can assign individual rooms to a second room group for which an inde-
pendent flow temperature is calculated.
Main menu > Commissioning > Extra configuration
> Rooms > Room X > Room group:
Room Factory setting Your setting
1 Room group 1  Room group 1
 Room group 2
2 Room group 1  Room group 1
 Room group 2
3 Room group 1  Room group 1
 Room group 2
4 Room group 1  Room group 1
 Room group 2
5 Room group 1  Room group 1
 Room group 2
6 Room group 1  Room group 1
 Room group 2
7 Room group 1  Room group 1
 Room group 2
8 Room group 1  Room group 1
 Room group 2
9 Room group 1  Room group 1
 Room group 2
10 Room group 1  Room group 1
 Room group 2
11 Room group 1  Room group 1
 Room group 2
12 Room group 1  Room group 1
 Room group 2