User Manual

36 / 124
Siemens Synco™ living CE1C2707en
Building Technologies Commissioning the system 23.08.2008
Lamp Factory setting Your setting Name of lamp
1 ---  --- (inactive)
 Active …………………
2 ---  --- (inactive)
 Active …………………
3 ---  --- (inactive)
 Active …………………
4 ---  --- (inactive)
 Active …………………
Info page “Light state“ is displayed only if at least one of the 4 lamps
is activated.
To indicate the light status, switch or dim actuators of any manufac-
ture can be used which, via S-Mode KNX TP1 *, communicate with
the central apartment unit.
* The connection of the relevant S-Mode objects of the central apartment unit to the relevant S-Mode
devices on KNX TP1 is made with a commissioning tool (ETS)
Temperature display
The central apartment unit can display 3 freely selectable temperatures. The
following types of temperature sensors can be used:
• Room temperature sensors QAA910 via RF
• Temperatures as S-Mode input objects via KNX TP1*
The 3 temperatures displayed cannot be used for control purposes
(display only).
Activate the required temperatures and enter the names to be used for their
display.
Main menu > Commissioning > Basic configuration
> Temperature display > Temperature X > Temperature X:
Main menu > Commissioning > Basic configuration
> Temperature display > Temperature X > Function:
Temperature Factory setting Your setting Temperature name
1 ---  --- (inactive)
 Active …………………….
2 ---  --- (inactive)
 Active …………………….
3 ---  --- (inactive)
 Active …………………….
* Connection of the respective S-Mode objects of the central apartment unit to the relevant S-Mode
devices on KNX TP1 is made with the help of a commissioning tool (ETS).