User Manual

35 / 124
Siemens Synco™ living CE1C2707en
Building Technologies Commissioning the system 23.08.2008
Switching
group
Factory setting Your setting
4 ---  --- (none)
 Via RF
 Q1 (local)
5 ---  --- (none)
 Via RF
 Q1 (local)
6 ---  --- (none)
 Via RF
 Q1 (local)
7 ---  --- (none)
 Via RF
 Q1 (local)
8 ---  --- (none)
 Via RF
 Q1 (local)
Configure doors
The central apartment unit can monitor up to two doors and display their
status on the info page.
A name can be assigned to each door.
Main menu > Commissioning > Basic configuration
> Doors > Door X > Door X:
Activate a door by setting the function to "Active":
Main menu > Commissioning > Basic configuration
> Doors > Door X > Function:
Door Factory setting Your setting Door name
1 ---  --- (inactive)
 Active …………………
2 ---  --- (inactive)
 Active …………………
Configure light status indication
The central apartment unit is capable of indicating the light status of
4 selected lamps.
Each of the 4 lamps can be assigned a name which appears on the info page.
Main menu > Commissioning > Basic configuration
> Light state > Lamp X > Lamp X:
Activate one of the lamps by setting the function to “Active“:
Main menu > Commissioning > Basic configuration
> Light state > Lamp X > Function: