User Manual

33 / 124
Siemens Synco™ living CE1C2707en
Building Technologies Commissioning the system 23.08.2008
Main menu > Commissioning > Basic configuration
> Switching groups > Switching group X > Function:
Switching
group
Factory setting Your setting Switching group
name
1 Info  ---
 Switch
 Dim
 Blind
 Scene
 Info
…………………
2 Info  ---
 Switch
 Dim
 Blind
 Scene
 Info
…………………
3 Info  ---
 Switch
 Dim
 Blind
 Scene
 Info
…………………
4 Info  ---
 Switch
 Dim
 Blind
 Scene
 Info
…………………
5 ---  ---
 Switch
 Dim
 Blind
 Scene
…………………
6 ---  ---
 Switch
 Dim
 Blind
 Scene
…………………
7 ---  ---
 Switch
 Dim
 Blind
 Scene
…………………
8 ---  ---
 Switch
 Dim
 Blind
 Scene
…………………
Prior to changing an already defined switching group function, all RF
actuators connected to the switching group must be disconnected
(refer to ”Disconnecting devices” on page 80). Before switching group
function "S
witch" can be changed, any connected switching group
relay must be disconnected and deactivated.
Per default, info pages 1 – 8 are assigned to the 4 pairs of soft keys.
The info page numbers can be changed on the user level (refer to the
Operating Instructions, section ”Direct selection of info pages”).