User Manual

26 / 124

Siemens Synco™ living CE1C2707en

Building Technologies Commissioning the system 23.08.2008

Room group pumps and DHW charging pump:

M2 M3

B2 B3

M1 DHW pump / diverting valve

B1 DHW sensor

K Electric immersion heater

E Consumer (radiator or floor heating)

T Room temperature sensor or room unit

M2 / M3 Room group pumps 1 and 2

B2 / B3 Flow sensors room groups 1 and 2

U1 Mixing valve for room group 1 (radiators)

U2 Mixing valve for room group 2 (floor heating)

Y1 Radiator control actuator

Y2 Heating circuit valve (2-position)

Define whether room group pumps are installed and how they are controlled.

--- Inactive --- no room group pump installed

Via RF Room group pump connected to relay output Qx of an

RRV91… heating circuit controller or RRV934 multi-

controller

B (local) Room group pump connected to relay output Q1 of the

central apartment unit

Main menu > Commissioning > Basic configuration

> Room groups > Room group X > Room group pump:

Room group Factory setting Your setting

1 ---  --- (none)

 Via RF

 Q1 (local)

2 ---  --- (none)

 Via RF

 Q1 (local)