User Manual

24 / 124
Siemens Synco™ living CE1C2707en
Building Technologies Commissioning the system 23.08.2008
Configure room groups
A number of rooms can be combined to one room group. Two independent
room groups can be formed.
For each room group, the flow temperature can be controlled, a room group
pump defined, and the return temperature limited.
U1
U2
M2 M3
B2 B3
U1 Mixing valve for room group 1 (radiators)
U2 Mixing valve for room group 2 (floor heating)
B2 / B3 Flow sensor room groups 1 and 2
M2 / M3 Room group pumps 1 and 2
T Room unit or room temperature sensor
Y1 Radiator control actuator
Y2 Heating circuit valve (2-position)
Room group names
Each room group can be assigned a name. If you wish, you can also enter or
change the room group’s name after commissioning.
Main menu > Commissioning > Basic configuration
> Room groups > Room group X > Room group X:
Room
group
Factory setting Your setting
1 Room group 1
2 Room group 2