User Manual

13 / 124
Siemens Synco™ living CE1C2707en
Building Technologies Mounting and installation 23.08.2008
Swing the electronics section
45° upward and pull it towards
you to remove it.
Fit the base
Secure the base to the wall
using at least 3 fixing screws.
Wiring
Wiring is described under “Connection terminals / wiring“ (refer to page 14).
Replace the electronics section
Insert the electronics section at
an angle of about 45° in the
base (left and right). Then,
swing it downward until it en-
gages.
The central apartment unit is
now ready for commissioning.