User Manual

12 / 124
Siemens Synco™ living CE1C2707en
Building Technologies Mounting and installation 23.08.2008
Mounting procedure
Mounting method / knockout holes
The base of the central apartment unit can be mounted directly on the wall or
on a recessed conduit box. It has an opening at the rear and 2 knockout holes
(one at the top and one at the bottom). If required, the hole(s) must be
knocked out before securing the base to the wall.
Holes
The base must be secured to the wall with at least 3 screws. To determine the
positions of the holes in the wall, hold the base horizontally against the wall
and mark the required positions.
Remove the electronics section from the base
Insert a screwdriver (size 3) in
the first and then in the second
slot at the bottom of the unit,
slightly push it and then turn to
unlock.