User Manual

116 / 124
Siemens Synco™ living CE1C2707en
Building Technologies Index 23.08.2008
DHW
charging time maximum ..... 105
configure............................... 28
conn. electric immers. heat. . 66
connect components ............ 65
connect pump / valve ........... 65
connect sensor..................... 65
electric immersion heater ..... 30
external................................. 30
forced charging................... 106
frost protection.................... 103
legionella protection ........... 103
priority................................. 105
pump .............................. 26, 29
setpoint increase ................ 106
switching differential........... 105
system pump...................... 107
temperature sensor .............. 29
valve............................... 25, 29
zone...................................... 85
dimensions
base...................................... 11
central apartment unit........... 11
disconnect device..................... 80
display temperature.................. 36
disposal .................................. 114
distribution zone ....................... 85
door
configure............................... 35
function................................. 35
name .................................... 35
door contacts connect .............. 68
door state output ...................... 44
doors/windows ......................... 46
E
Economy increase.................... 89
electric immersion heater
configure............................... 30
summer operation .............. 107
enable setpoint limitation.......... 88
ERF910 .............................. 45, 76
exhaust hood
configure............................... 45
connect................................. 75
impact window switches..... 112
expert level............................... 17
expert password....................... 87
external DHW........................... 30
extra configuration.................... 47
F
factory setting .....................3, 114
fault
delete..................................109
history .................................109
status messages bus............37
fault inputs
configure...............................37
connect .................................69
fault outputs
configure...............................38
connect .................................70
file name.................................110
fireplace mode
configure...............................50
connect contact ....................63
flow sensor connect..................61
flow temperature limitation .......94
forced charging DHW .............106
frequency legionella protect. ..104
frost protection setpoint ..........103
function
room group ...........................25
settings .................................87
ventilation .............................31
G
GAMMA wave ..........................34
connect actuator .............68, 78
guide value .................................3
H
H/C changeover
configure...............................40
locking time...........................91
Hager tebis devices connect ....76
heat demand DC 0..10 V
configure...............................43
connect .................................73
heat demand relay
configure...............................42
connect .................................73
heat distribution zone ...............85
heating circuit controller
connect .................................55
heating type..............................18
heating/cooling ...................40, 46
holes.........................................12
holidays ....................................84
HR bypass
configure...............................51