User Manual

114 / 124
Siemens Synco™ living CE1C2707en
Building Technologies Maintenance / service 23.08.2008
Maintenance / service
Peripheral devices
Restore factory settings
To restore the factory settings of the peripheral devices, press the multifunc-
tion or binding button on the device for at least 20 seconds.
Then, a restart is made. Now, the factory settings are restored and the device
is no longer connected to the central apartment unit.
Manual control of the radiator control actuator
For service work, or in the event of
fault, the SSA955 can be brought into
any position using a 3 mm hexagon
socket wrench.
-
+
2700Z06
-
+
3 mm
Disposal
Dispose of the central apartment unit and the associated partner
devices as electronic waste in compliance with European directive
2002/96/EEC (WEEE), and not together with general garbage. Ob-
serve all relevant national regulations by using designated disposal
channels. Comply with all local and currently valid legislation. Dispose
of exhausted batteries in compliance with relevant environmental
regulations.