User Manual

112 / 124
Siemens Synco™ living CE1C2707en
Building Technologies Function settings 23.08.2008
Exhaust hood
Impact of window switches
For operation of the exhaust hood, at least one of the windows in one of the
rooms defined here must be open.
Main menu > Settings > Exhaust hood > Imp window switches:
Factory setting --- (no impact from window switches)
Your setting  Room 1,  Room 2,  Room 3,  Room 4,
 Room 5,  Room 6,  Room 7,  Room 8,
 Room 9,  Room 10,  Room 11,  Room 12
Device information
VVS-ID
From the current software and memory data (software version, EEPROM
data, flash data) an unambiguous “Valid Version Set-ID” is produced.
This enables Siemens to unambiguously identify the software status of a
central apartment unit e.g. when a problem occurs.
Main menu > Device information > VVS-ID:
Data backup
The current commissioning data can be saved, including the date and the
year. The data saved or the factory settings can be retrieved, if required.
Main menu > Data backup > Storage date (read only):
Main menu > Data backup > Storage year (read only):
Main menu > Data backup > Restore:
Main menu > Data backup > Save:
Main menu > Data backup > Restore factory setting:
When saving the new data, any data previously saved in the backup
memory is overwritten (cannot be retrieved).
When restoring data or factory settings, the current data set in the
device’s main memory is overwritten (cannot be retrieved).
When restoring data, certain bus settings and all set texts are not
overwritten and are retained with their present state.
When restoring the factory settings, customized texts are also reset.