User Manual

108 / 124
Siemens Synco™ living CE1C2707en
Building Technologies Function settings 23.08.2008
Switching groups
Scene number
The scenes defined during commissioning automatically is numbered (1..16).
To prevent scene numbers from overlapping with other existing scene buttons
(e.g. GAMMA wave or Hager tebis), or to provoke them, the scene numbers of
the central apartment unit can be changed, if required.
Main menu > Switching groups > Switching group X
> Scene A or B > Scene number:
Please observe the different scene number ranges of the different
product ranges:
• RF adapter plug 1..16
• GAMMA wave: 1..16
• Hager tebis radio: 1..8
• KNX TP1 actuators: 1..64 (complete range)
When using scene numbers outside the supported range, the actua-
tor does not respond to the respective scene commands.
Switching group Scene Factory setting Your setting
A 1
1
B 2
A 3
2
B 4
A 5
3
B 6
A 7
4
B 8
A 9
5
B 10
A 11
6
B 12
A 13
7
B 14
A 15
8
B 16