User Manual

107 / 124
Siemens Synco™ living CE1C2707en
Building Technologies Function settings 23.08.2008
System pump required
If the system pump is controlled by a KNX TP1-compatible controller, it can be
selected whether the system pump should run during DHW charging (depend-
ing on the selected type of plant).
3131S59
A
B
Case A System pump required for DHW charging (system pump: Yes)
Case B System pump not required for DHW charging (syst. pump: No)
Main menu > DHW > Settings > System pump:
Factory setting Yes
Your setting  Yes
 No
Summer operation electric immersion heater
Decide whether the DHW time switch should be used for controlling the elec-
tric immersion heater.
Without time
switch
The time switch has no impact on the control of the
electric immersion heater in the summer. The DHW
temperature is maintained at the normal setpoint.
With time switch For control of the electric immersion heater in the
summer, the controller gives consideration to the time
switch and the holiday program. The DHW operating
mode must be set to ”Auto“.
Main menu > DHW > Settings > Su op el imm heater:
Factory setting With time switch
Your setting  Without time switch
 With time switch