User Manual

87 / 110
Siemens Synco™ living CE1B2740en
Building Technologies Room unit QAW910 13.12.2010
Room unit QAW910
Operation
All operating elements are lo-
cated on the front of room unit
QAW910.
The function button is located in
the battery compartment. The
room unit communicates via ra-
dio signals and has no connec-
tion terminals.
Settings on the room unit only
impact the room to which the
room unit is assigned. They do
not influence any other rooms.
Settings on the room unit are
automatically synchronized with
those of the central apartment
unit.
Room operating modes
Press the Mode button to select the required room operating mode.
The display shows an hourglass which disappears as soon as the
central apartment unit and the room unit have adopted the new set-
tings.
AUTO
The room is controlled in accordance with time program
and special day program.
MAN
The room is maintained at the Comfort setpoint.
MAN
The room is maintained at the Precomfort setpoint.
MAN
The room is maintained at the Economy setpoint.
MAN
The room is maintained at the Protection setpoint.
Override by the central apartment unit to maintain the
Comfort setpoint.
Override by the central apartment unit to maintain the Pre-
comfort setpoint.
Override by the central apartment unit to maintain the
Economy setpoint.
Override by the central apartment unit to maintain the Pro-
tection setpoint.