User Manual

84 / 110
Siemens Synco™ living CE1B2740en
Building Technologies Central apartment unit QAX9x3 13.12.2010
Maximum one bus fault status message can be handled. If both fault
outputs are set to fault source Bus with different priorities, only one
fault output can be activated simultaneously even if several fault mes-
sages with different priorities are pending at the bus!
We thus recommend to set only fault source Bus for a fault output.
Texts
Plant name
Assign the plant or the apartment a self-explanatory name,
e.g. ”Main street 22“:
Main menu > Settings > Texts > Plant name:
Room names 1 – 12
Assign the rooms self-explanatory names, e.g. Living, Eating, Kitchen, Bath-
room, etc.:
Main menu > Settings > Texts > Rooms > Room X:
Predefined room names are provided for quick and easy entry of room
names. You can adjust a predefined room name.
Switching group names 1 – 8 (QAX913 only)
Assign the switching groups self-explanatory names, e.g. Light Living, Blinds
Eating, etc.:
Main menu > Settings > Texts > Switching groups > Switching group X:
Door names 1 – 2 (QAX913 only)
Assign a meaningful name to the doors, e.g. entry door, garage door, etc.
Main menu > Settings > Texts > Doors > Door X:
Lamp names 1 – 4 (QAX913 only)
Assign the lamps self-explanatory names, e.g. Living, Eating, etc.:
Main menu > Settings > Texts > Light state > Lamp X: