User Manual

81 / 110
Siemens Synco™ living CE1B2740en
Building Technologies Central apartment unit QAX9x3 13.12.2010
See the following illustration for softkey numbering (switching groups 1 – 4):
1A, 1B Softkeys for switching group 1
2A, 2B Softkeys for switching group 2
3A, 3B Softkeys for switching group 3
4A, 4B Softkeys for switching group 4
For softkeys defined as info pages, you can select the info pages to be dis-
played when pressing the keys.
Main menu > Settings > Info page selection > Info page button 1A:
Main menu > Settings > Info page selection > Info page button 1B:
Main menu > Settings > Info page selection > Info page button 2A:
Main menu > Settings > Info page selection > Info page button 2B:
Main menu > Settings > Info page selection > Info page button 3A:
Main menu > Settings > Info page selection > Info page button 3B:
Main menu > Settings > Info page selection > Info page button 4A:
Main menu > Settings > Info page selection > Info page button 4B:
Faults (QAX913 only)
Fault inputs
External plant component faults can be communicated to the central apart-
ment unit by closing a contact. Eight fault inputs are available, each assigned
to one of the following fault types:
• Water leak
• Gas leak
• CO alarm
• Panic
• Emergency
• Fault 1 – 3 (user-defined)
The fault inputs must be activated during plant commissioning, and the
required input must be connected to the central apartment unit to allow
for the settings described here.
See document ”Mounting and Commissioning (CE1C2740en)“ for de-
scriptions.