User Manual

78 / 110
Siemens Synco™ living CE1B2740en
Building Technologies Central apartment unit QAX9x3 13.12.2010
Outputs
Display output states
The states of the outputs can be displayed via the following operating line:
Main menu > Inputs/outputs > Outputs > …
The following values – if available – are displayed:
• Switching group X (relay per switching group 1 – 8 QAX913 only)
• Fault output X (per fault output 1 – 2, QAX913 only)
• Heat demand relay
• Heat demand DC 0..10 V
• Cooling demand relay
• Cooling energy demand DC 0..10 V
• Summer operation
• Cooling enable
• Water safety shutoff valve (QAX913 only)
• Gas safety shutoff valve (QAX913 only)
• Status output X (per status output 1 – 4, QAX913 only)
• Window/door state
• Exhaust hood
• Supervision (QAX913 only)
Settings
Device
Language
The unit is supplied with English as default operating language. However, you
can select the language you want:
Main menu > Settings > Device > Language:
The path is now presented in the language you selected.
Main menu > Settings > Device > Language:
Altitude above sea level
To ensure display of accurate weather forecasts in the quiescent picture, the
absolute atmospheric pressure acquired by the meteo sensor is converted to
pressure at sea level.
For this reason, the plant’s altitude above sea level must be known. Enter the
plant’s altitude on the following operating line:
Main menu > Settings > Device > El above sea level:
Factory setting 0 m above sea level