User Manual

71 / 110
Siemens Synco™ living CE1B2740en
Building Technologies Central apartment unit QAX9x3 13.12.2010
Main menu > Supervision > Signaling > Buzzer > Supervision confirm:
Main menu > Supervision > Signaling > Status output X
> Supervision confirm:
No No supervision confirmation (factory setting).
Yes Supervision is confirmed.
Note that brief activation of an outdoor siren (up to 120 dBA) may be
considered a nuisance by neighbors.
Consumption data
Display current meter states
The current meter states can be queried via menu "Consumption data" and
the corresponding info pages (is configured accordingly) for each meter. A
meter status for the read heating and cooling consumption is displayed for
combined heat/cooling energy meters.
The central apartment unit updates the meter states every 4 hours.
The values displayed on the central apartment unit may thus deviate
slightly from those on the meters.
A radio connection test on the consumption data interface WRI982 al-
lows for triggering reading out of meter states outside the 4-hour cycle
(see page 101).
Current meter reading
Shows the current meter reading.
Main menu > Consumption data > … > Reading curr:
Meter reading for current heat
Shows the current meter reading for heat consumption of a combined heat/
cooling energy meter.
Main menu > Consumption data > … > Reading heat curr:
Meter reading for current cooling
Shows the current meter reading for cooling consumption of a combined heat/
cooling energy meter.
Main menu > Consumption data > … > Reading cool curr: