User Manual

69 / 110
Siemens Synco™ living CE1B2740en
Building Technologies Central apartment unit QAX9x3 13.12.2010
If a supervised window is opened, the message "Window open" appears. In
addition, the buzzer, status output and a switching group function can be acti-
vated.
The "Window open" fault message remains active until supervision is
changed, even after all supervised windows are closed.
Main menu > Supervision > Windows > Rel "Partly monit":
Main menu > Supervision > Windows > Rel "All monit":
Factory setting ---- (none)
Doors
Up to two doors can be supervised. You can select the doors to be supervised
in the options list.
Main menu > Supervision > Doors > Rel "Partly monit"":
Main menu > Supervision > Doors > Rel "All monit"":
Factory setting ---- (none)
Message delay for doors
If a supervised door is opened, the fault message "Door open" appears only
after expiration of a set message delay time.
In addition, the buzzer, status output and a switching group function can be
activated.
The "Door open" fault message remains active until supervision is
changed, even after all supervised doors are closed.
You can set the duration of the message delay time (00.00..59.55 ms):
Main menu > Supervision > Doors > Message delay:
Factory setting 05.00 m.s
You must deactivate supervision before the message delay time has
expired to avoid the fault message "Door open" and the alarm sound.
To do this, set the message delay time to ensure that you have suffi-
cient time to go to the central apartment unit and deactivate supervi-
sion when returning home.
When a supervised door is opened, a beep is sounded whose frequency dou-
bles in the last 15 seconds of the message delay time.
You can set the volume of the beep (0..100%) or deactivate it by entering set-
ting 0%.
When you set the volume, a permanent beep is sounded at the corresponding
volume.
Main menu > Supervision > Doors > Volume mess delay:
Factory setting 15 %