User Manual

102 / 110

Siemens Synco™ living CE1B2740en

Building Technologies Service 13.12.2010

Function button on heating circuit controllers

RRV912 / RRV918, on multi-controller RRV934 and

on consumption data interface WRI982

The binding test of the heating circuit controller / multi-controller / consumption

data interface is carried out for each channel. With the multi-controller, the test

can also be carried out for a channel group. Use the channel selection button

to select the channel whose binding you want to check. The LED associated

with the selected channel blinks. Briefly press the function button.

E.g. on the RRV912 heating circuit controller:

LED = Light emitting diode

F = Function button

CH = Channel selection button

Binding test for AFK914/C01 handheld control

Simultaneously press the upper tow buttons 1

and 2 on the handheld control. Stop pressing

as soon as the LED is lit.

Maintenance and cleaning

When cleaning the central apartment unit, use a soft cloth, slightly moistened

with water. Never use alcohol.

LED