User Manual

100 / 110
Siemens Synco™ living CE1B2740en
Building Technologies Service 13.12.2010
AFK914/C01 handheld control
Ready a new coin cell of type
CR2032.
Unscrew the rear of the handheld
control.
Remove the housing rear.
Remove the old batteries.
Insert the new battery and make sure
polarity is right.
Put the rear of the housing back in
place.
Tighten the screw.
Dispose of the old battery in compli-
ance with environmental regulations.
+
CR2032
3 V
After inserting the new battery, test the battery by pressing a button (e.g. Light
on). The LED of the handheld control is lit for max. 2 s in blue provided the
battery charge suffices.