User Manual

68 / 134
Siemens Synco™ living CE1C2740en
Building Technologies Commissioning the system 13.12.2010
Connect output for room group pump
Inform the central apartment unit that you want to use an output to connect a
room group pump:
Main menu > Commissioning > RF connections > Room groups
> Room group X > Room group pump > Connect device:
The following device channels can be connected:
• Universal relay output Qx of a multi-controller (see page 65).
• Universal relay
output Qx of a heating circuit controller (see page 62).
Connect ventilation components
The following ventilation components are assigned appropriate inputs or out-
puts:
• Humidity sensor
• Indoor air quality sensor (CO sensor)
• Fireplace mode
• Ventilation contacts 1 and 2
• Step selector 1-stage to 3-stage
• HR bypass
On the ventilation components, the respective input and output func-
tions must be set to "Via RF", enabling an input or output of a heating
circuit controller or multi-controller to be assigned to them.
Connect input for the humidity sensor / indoor air quality sensor
Inform the central apartment unit that you want to use an input as humidity
sensor input or indoor air quality sensor input:
Main menu > Commissioning > RF connections > Ventilation
> Inputs > Humidity sensor > Connect device:
Main menu > Commissioning > RF connections > Ventilation
> Inputs > Indoor air quality sensor > Connect device:
The following device channels can be connected:
• Universal input Xx of a multi-controller (see page 65).
Connect input for open fireplace mode
Inform the central apartment unit that you want to connect an input for fire-
place mode:
Main menu > Commissioning > RF connections > Ventilation
> Inputs > Open fireplace mode > Connect device: