User Manual
3 / 134
Siemens Synco™ living CE1C2740en
Building Technologies 13.12.2010
Congratulations …
… on choosing the Siemens Synco™ living system and thank you for pur-
chasing the central apartment unit!
The present document describes how to mount and commission the central
apartment unit and the other system components.
First, please familiarize yourself with the operating philosophy of the central
apartment unit. Operation itself is covered by the operating instructions
(CE1B2740en).
Symbols used
The symbols used on the central apartment unit are explained in Section "Dis-
play symbols" in the operating instructions. The following symbols are used in
this document:
This symbol draws your attention to important information you must ob-
serve to ensure safe operation of the plant.
The info symbol refers to additional information, notes and practical tips
on settings and operation of the various units and the system.
This symbol refers to disposal issues.
Setting values and predefined settings
When commissioning the system, the activated parameters are loaded as
predefined settings. The documentation differentiates between guide values
and factory settings.
Guide value Setting recommended for most types of plant.
Factory setting Setting that can be changed to meet user- or plant-
specific requirements.
Siemens Switzerland Ltd
Industry Sector
Building Technologies Division
Gubelstrasse 22
6301 Zug
Switzerland
Tel. +41 41-724 24 24
www.siemens.com/sbt
© 2006-2010 Siemens Switzerland Ltd
Subject to change