User Manual

14 / 134
Siemens Synco™ living CE1C2740en
Building Technologies Mounting and installation 13.12.2010
Mounting procedure
Mounting method / knockout holes
The base of the central apartment unit can be mounted directly on the wall or
on a recessed conduit box. It has an opening at the rear and 2 knockout holes
(one at the top and one at the bottom). If required, the hole(s) must be
knocked out before securing the base to the wall.
Holes
Secure the base to the wall with at least 3 screws. To determine the positions
of the holes in the wall, hold the base horizontally against the wall and mark
the required positions.
Remove the electronics section from the base
Insert a screwdriver (size 3)
in the first and then in the
second slot at the bottom of
the unit, slightly push it and
then turn to unlock.