User Manual

122 / 134
Siemens Synco™ living CE1C2740en
Building Technologies Function settings 13.12.2010
Device list repeater
When using RF repeaters, the list of devices to be repeated by the central
apartment unit is loaded in the RF repeater. The device list is loaded when the
assignment of RF repeaters or the device list is changed.
The following display shows if the device list has been loaded successfully in
the RF repeater.
Main menu > Device information > Device list repeater:
Loading.. Loading of the device list in the RF repeater in pro-
gress.
Up-to-date Device lists are up to date, i.e. device data loaded
successfully in all RF repeaters.
While the device lists are loaded in the RF repeater, telegram repeti-
tion in the assigned devices by the RF repeater is not guaranteed.
Data backup
The current commissioning data can be saved, including the date and the
year. The data saved or the factory settings can be retrieved, if required.
Main menu > Data backup > Storage date (read-only):
Main menu > Data backup > Storage year (read-only):
Main menu > Data backup > Restore:
Main menu > Data backup > Save:
Main menu > Data backup > Factory setting:
When saving the new data, any data previously saved in the backup
memory is overwritten (cannot be retrieved).
When restoring data or factory settings, the current data set in the
device’s main memory is overwritten (cannot be retrieved).
When restoring data, certain bus settings and all set texts are not
overwritten and are retained with their present state.
When restoring the factory settings, customized texts are also reset.