User Manual

Building Automation
HVAC Products
Legal disclaimer: This declaration is for information purposes only.
The above information may be inaccurate or incomplete. Siemens Building Technologies Ltd. therefore does
not assume liability for any error or any consequences which may arise from the use of this information to the
maximum extent under the law.
If you require further information on environmental aspects and disposal, contact your local Siemens branch office.
Siemens Building Technologies CA2E1646en
26.04.02 page 2 of 2
Materials
total weight of device
41 g
Plastics
(PC+ABS) FR(40)
fiberglass-free, contains halogens
front plate, dial, mounting
plate
12 g
PC, halogen-free, fiberglass-free extension for operation
potentiometer
1g
PS protective cover
3g
Metals Steel, zinc-plated 4 screws M3x12
2 screws M3x6
2g
Brass, nickel plated 1 spacer, hexagonal
4g
Circuit board with
components
FR4, containing halogens, SnPb solder circuit board with
components
19 g
Special components
3-pin on the circuit board (3 g)
Disposal
Do not dispose of the device as part of standard household garbage, but as
special waste from electrical and electronic components. This particularly applies
to electronic circuit boards.
Additionally, the law may mandate special treatment for specific components or
special treatment may be ecologically sensible.
Observe all local and applicable laws.
Notes
Environmental benefits
individually adjustable room setpoint temperature.