Environmental Declaration

EPD - Type II
Based on ISO 14021
QAX30.1 PPS Room Unit
QAX31.1 PPS Room Unit
QAX32.1 PPS Room Unit
QAX33.1 PPS Room Unit
Product line
Siemens Switzerland Ltd
Building Technologiies Division
Gubelstrasse 22
CH-6300 Zug
Management System since by
ISO 9001 (Qualität) 22.07.1986 SQS
ISO 14001 (Umwelt) 20.10.1998 SQS
OHSAS 18001 (Arbeit u Gesundheit) 01.01.2011 SQS
Desigo RX
Environmental
Product Declaration
Type of equipment /
Product No.
Product
Process control
Typical energy consumption 1kWh/a
Maintenance
Fire protection according to
Fire load 4MJ
20-PAP Corrugated fiber board Folded bottom box 25g
21-PAP Fiber board Folded box 2g
Total weight of device variant *) see below
The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
ASA+PC Front variant
ASA+PC Housing 28g
ASA+PC Terminal base cpl. 31g
ASA+PC Setting knob variant
VMQ Silicone rubber Operating mode switch variant
PC Light guide variant
PA 3xNylon plug 1g
Steel; zinc plated 3xWood screw 5g
Not necessary
EN 60730-1
Environmentally compatible
product design
Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes
the environmental impact of its products with respect to production, procurement, sales, use, services and disposal during
the product and process planning phases by complying with Siemens EP Standard No. 1 (former SN 36350)
"Specifications on Environmentally Compatible Product and System Design".
Metals
Product use
Plastics
Risk of fire
Materials
Packaging
Page 1/2