Data Sheet for Product

2/6
Siemens Cable temperature sensors QAP… CE1N1831en
Smart Infrastructure 2021-05-27
Name
Part number/
t ype reference
Protection pocket, Ms63, PN10, immersion length 100 mm
ALT-SB100
1)
Cable holder for protection pocket mounting
4 213 1416 0
Changeover mounting kit
For fitting on pipes (pipes of about 13...18 mm dia.),
consisting of holding piece and cable ties (2x)
ARG22.1
2)
Aluminium bar
Consisting of bar with riveted holder and rubber grommet
ARG22.2
1) For other protection pocket accessories, refer to Data Sheet N1194.
2) Suited for max. 95 °C. Use cable ties made of metal for temperatures above 95 °C
Ordering and delivery
When ordering, please give type reference of sensor and part numbers / type refer-
ence of the accessories required.
Example: Cable temperature sensor QAP2010.150.
The cable temperature sensor is supplied without any mounting accessories. These
must be ordered separately.
Equipment combinations
The cable temperature sensors are suited for use with all types of controllers that can
handle the sensor’s passive output signal.
Function
The sensor acquires the temperature via its sensing element. The resistance of the
sensing element changes as a function of the ambient temperature.
The resistance value is used for further handling by a suitable controller.
LG-Ni 1000 Characteristic: Accuracy:
Accessories
Sensing elements