Environmental Declaration

Building Technologies
31.03.2010 CE1E1762en
Page 2 of 2
Materials
Total weight of device
chart *
Plastics PC GF10 Housing: base and cover
chart *
PA66 GF25
QAM only:
2 half shells (bracket)
QAC only:
Sealing plug
6 g
2 g
PA66 GF35 QAM only: Mounting tube, flange
32 g
PA6 Screwing kit
8 g
Polyolefin QAM only: Shrinkable tubing (probe)
3 g
Q Silicone rubber
QAE only:
Casting compound (sensor
pocket)
chart *
Metals Copper QAM only: Flexible sensor probe
18 g
Steel, stainless
QAE only:
Sensor pocket and nipple
QAC only:
Sensor body
chart *
6 g
CuZn37, nickel plated QAE only: Protection pocket
chart *
Strip steel QAE only: Clamp
6 g
Steel QAC only: 4 screws (cover)
4 g
Others PA66 / Cu nickel plated Terminal strips
chart *
PCB assembled FR4 TBBA, solder SnAgCu
chart *
* Variant parts list
QAE2164.010 QAE2164.015 QAE2174.010 QAE2174.015
Total weight 203 g 220 g 199 g 215 g
Housing: base and cover 50 g 50 g 50 g 50 g
Casting compound (sensor pocket) 3 g 4 g 3 g 4 g
Sensor pocket and nipple 18 g 24 g 18 g 24 g
Protection pocket 83 g 94 g 83 g 94 g
2 Terminal strips 6 g 6 g 5 g 5 g
PCB assembled 19 g 19 g 16 g 16 g
QAM2161.040 QAM2171.040 QAC3161 QAC3171
Total weight 151 g 145 g 109 g 105 g
Housing: base and cover 50 g 50 g 54 g 54 g
Terminal strips 6 g 2 g 6 g 5 g
PCB assembled 19 g 16 g 19 g 16 g
The total weight of a device may deviate from the total of the weights of all its individual components due to runding.
Disposal
Do not dispose of the devices as part of unsorted municipal waste.
This particularly applies to electronic circuit boards.
Additionally, the law may mandate special treatment for specific components or
special treatment may be ecologically sensible.
Observe all local and applicable laws.
Materials: All sensors are delivered with the following accessories kits:
Adaptor (5g, PA66 GF30) & hexagon nut (1g, PA6) in bag (PE)
Legal disclaimer: This declaration is for information purposes only
This environmental product declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that
the product will retain a particular composition for a particular period.
Siemens Switzerland Ltd. therefore does not assume liability for any error or for any consequences, which may arise from the use of this
information to the maximum extent under the law.
If you require further information on environmental aspects and disposal, contact your local Siemens branch office.