User Manual

Configurations
Bus te
rmination
4
A6V11610643_en--_a 13 | 16
Baud rate Parity Stop bit
1)
Configuration Function
1 2 3 4 5 6 7
OFF OFF OFF 0 = Auto
OFF OFF ON 1 = 9600
OFF ON OFF 2 = 19200
OFF ON ON 3 = 38400
ON OFF OFF 4 = 57600
ON OFF ON 5 = 76800
ON ON OFF 6 = 115200
ON ON ON others = Auto
OFF OFF 0 = Even (default)
OFF ON 1 = Odd
ON OFF 2 = No parity
ON ON others = Even
OFF 1 (default)
ON 2
OFF
Configurable via master or
push button / on-event
addressing
ON DIP switches
NOTE:
1)
Parity + Stop bit only support following combinations: 1-8-E-1, 1-8-O-1, 1-8-N-1
and 1-8-N-2. Others will be treated as 1-8-E-1.
4.7 Bus termination
Jumper position descriptions:
● Jumper position (OFF) = disable terminating resistor (factory setting)
● Jumper position (ON) = enable terminating resistor
DIP2
Baud rate, transmission
format, configuration