User Manual

Configurations
DIP switch configuration
4
12 | 16 A6V11610643_en--_a
4.6 DIP switch configuration
The Modbus setting can be configured via DIP switches when DIP2-position 7 is
ON.
NOTICE
Modbus
registers 764…768 are not writable via a master under DIP switches
configuration.
The sensor has two sets of DIP switches: DIP1 and DIP2.
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
Address
1 2 3 4 5 6 7 8
OFF OFF OFF OFF OFF OFF OFF OFF 0
(default)
OFF OFF OFF OFF OFF OFF OFF ON 1
OFF OFF OFF OFF OFF OFF ON OFF 2
OFF OFF OFF OFF OFF OFF ON ON 3
OFF OFF OFF OFF OFF ON OFF OFF 4
… … … … … … … … …
ON ON ON ON ON ON ON ON 255
NOTES:
● Modbus address configuration: Valid address range 1…247, others = 0
● If an invalid address is set, the newly set values of register 764…768 are not
activated. The registers keep the previous value.
DIP1
Address configuration