Full Product Manual

Tandem Combination Type
Arc-Fault Circuit Interrupters
(CAFCI)
Pigtail and Plug-on Neutral
Pigtail
Plug-on Neutral
Catalog
Number
Ampere
Rating
Interrupting
Rating
UL
Type
Connection
Type
Q1515AFC
15/15 10kA QTA
Pigtail
Q2020AFC
20/20 10kA QTA
Pigtail
Q1515AFCN
15/15 10kA QTAN
Plug-on Neutral
Q2020AFCN
20/20 10kA QTAN
Plug-on Neutral
usa.siemens.com/afci
Siemens Tandem AFCI Breakers are the perfect solution to
wiring made easier. The design allows for more circuits in a
smaller loadcenter. Installed indicator flags disappear when the
load wires are inserted correctly.
Siemens CAFCI plug-on breakers now have a single load lug(s)
only. Wiring made easier with the neutral lug removed. These
breakers can be installed in the same manner as the thermal
magnetic breakers. This allows the installer to land ground and
neutral conductors in the load center before installing the
breaker and load conductor.
Tandem AFCI breakers without the rejection feature can be
installed in any panel that lists that breaker type or where a
substitution letter exists for that breaker type. The schematic,
located on the wiring diagram, will indicate the positions where
these breakers can be placed by showing two circuits per space.
The total circuits listed for panel should not be exceeded.
Features
• One breaker feeds two circuits to save on space and time
• Installed indicator flags disappear when the load wires are
inserted correctly
• Load Lug(s) only
• Available in pig-tail and plug-on neutral types
• Trusted Plug-On Neutral connection
• LED indicators for troubleshooting
• Insta-wire connectors
Technical Data
• , AIC
• V
• UL Listed
• HACR and SWD rated