Data Sheet for Product

4
Siemens A6V11664137_en--_j
Smart Infrastructure 2022-01-13
Product documentation
Document Document no.
Desigo Control Point planning and installation guide A6V11666343
Desigo Control Point user's guide A6V11211557
Desigo Control Point engineering manual A6V11211560
Desigo Touch Panel client commissioning A6V11604303
ABT Site Online help --
Related documents such as the environmental declarations, CE declarations, etc., can be
downloaded from the following Internet address:
https://siemens.com/bt/download
Notes
Safety
CAUTION
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
● Observe national provisions and comply with the appropriate safety regulations.
Engineering
For additional information on cable lengths, topology, etc.:
See Desigo Control Point Basic documentation, A6V11170804
Mounting
The devices are suitable for installation in panel doors
Mounting frames are available for wall mounting (ordered separately, see accessories):
● PXM40.E and PXM50.E (flush mounting e.g. cavity walls)
● PXM30.E (surface mounting, e.g. panels doors or walls)
Mounting instructions
Mounting installations are printed on the unit's packaging material.
Cut outs for panel installation and wall mounting
See "Dimensions".
Installation
Power is connected to a plug-in screw terminal block.
This connection is not required for Power over Ethernet (PoE).
Commissioning
Touch panels can be commissioned without tools.
All necessary network parameters can be entered directly on the unit.
No additional engineering required for operation using default views.
Each device has a unique identification number to ensure efficient commissioning.
It is also printed on the removable barcode label.