User Manual

Settings
Clear device
6
28
| 40 A6V11604303_en--_b
6.4 Clear device
The State view on the Overview Web page allows you to clear the device or the application and view basic
device and network configuration information.
①
Click to display or hide the
Setup & service
menu.
②
Clear device
Stops and clears the device and clears the application configuration.
● If a Web browser is always used to configure the device and application, the following apply after a clear device is
performed:
– The factory-loaded application is available on the device
– The factory-loaded application can be activated through the Web browser.
● If ABT Site is used
at any time to configure the device and application, the following apply after a clear device is performed:
– The factory-loaded application is not available on the device.
– ABT Site must be used to configure the device and application.
③
Clear application
Stops the device, clears the application configuration, and keeps the existing device configuration. The device must be
configured. The loaded application remains on the device and can be activated.
State view: Device and network configuration
Field
Description
Object name Name of the device. For example,
DCP230
.
Model name Device model. For example,
PXG3.W200-1
.
Local date Current date in
DD.MM.YYYY
format.
Local time Current local time in
HH:MM:SS
format.
System status Current status of the system. Default is
Operational
.
Firmware revision Current firmware loaded into the device. For example,
FW=01.21.47.150
.
Serial number The serial number of the physical device.