User Manual

Commissioning
4
16
| 40 A6V11604303_en--_b
Setup wizard – Network settings
Setting
Description
DHCP check box
Select to use dynamic IP addressing. Otherwise, complete the
IP address
,
Subnet mask
and
Router
fields to use a fixed IP address.
MAC Address (Information only) MAC address of the device.
SNMP check box If selected, SNMP monitoring is active.
Read community string Community string that allows reading information from a device.
Port (Information only) Port defined for IP communication.
Enable (Information only) Online status of the IP communication port.
Network number Number that identifies the IP network. Range is
0
to
65534
. Default:
0
UDP port
UDP port number that the service uses to communicate. Range is
0
to
65535
. Default:
47808
(BAC0)
Status (Information only)
Table 3: Network settings fields.