Data Sheet for Product

2 / 5
Siemens A6V11646070_en--_a
Smart Infrastructure 2019-06-18
Application
The PXA.S30 mounting set easily mounts operator units PXM30-1 or PXM30.E on a wall or
on a control panel door.
The 138x138mm cutout often needs to be closed when migrating automation stations.
This workstep is costly, mostly specific to the plant, and often aesthetically undesirable.
The PXA.S30 mounting set simplifies renovations and reduces costs.
Technical and mechanical design
The mounting set consists of a top and bottom part, both made of stainless steel.
● The touch panel is installed in the top part
● The bottom part is mounted on the wall / panel door
● The top part is attached to the bottom part
Type summary
Type Order number Description
PXA.S30 S55842-Z123 Mounting set
Product documentation
R
elated documents such as environmental declarations, CE declarations, etc., can be
downloaded at the following Internet address:
http://siemens.com/bt/download
Mounting
The following examples describe the various solutions. There are essentially three variants
that can also be combined.
● Cover an existing 138x138 mm cutout.
● Easy mounting of a PXM30-1 or PXM30.E on panel doors or wall.
● Mounting a PXM30-1 or PXM30.E on the panel door and mounting a new automation
station on the inside of the panel door on mounting rails.
B
e sure to maintain the required ambient temperature for the PXM30-1, PXM30.E touch
panels when mounted.