Data Sheet for Product

6
Siemens A6V11664139_en--_i
Smart Infrastructure 2022-01-13
Connections
Screw terminals, plug-in
Cu-wire or Cu-strand with wire end sleeve 1 x 0.6 mm to 2.5mm
2
(22 to 14 AWG) or
2 x 0.6 mm to 1.0 mm
2
(22 to 18 AWG)
Cu-strand without wire end sleeve 1 x 0.6 mm to 2.5 mm
2
(22 to 14 AWG) or
2 x 0.6 mm to 1.5 mm
2
(22 to 16 AWG)
Stripping length 6...7.5 mm (0.24...0.29 in)
Slotted screws Screwdriver, size 1
with shaft ≤ 4.5 mm
Max. tightening torque 0.6 Nm (0.44 lb ft)
Ethernet interface
Plug
Interface type
Bit rate
Protocol
Galvanic isolation of system neutral
RJ45, screened
100BASE-TX, IEEE 802.3 compatible
10/100 Mbps, autosensing
BACnet over UDP/IP
Yes
Interface USB 2.0
Plug
Data rate (USB 2.0 full speed)
Protective switch against surges and over current
Galvanic isolation of system neutral
Type B (device)
12 Mbps
Yes
No
Conformity
Ambient conditions and protection classification
Assigned per EN 62368-1
Degree of pollution
Overvoltage category
2
III
Design Device suited for use with equipment of safety classes I
and II
Degree of protection of housing to EN 60529
From the front
From the back (panel mounted)
IP54
IP20
Climatic ambient conditions
Transport (packaged for transport)
as per EN60721‑3‑2
Operation per EN 60721-3-3 (wall mounted)
Operation per EN 60721-3-3 (panel mounted)
Class 2K3
Temperature -25...70 °C (-13... 158°F)
Air humidity 5...90%
Class 3K4
Temperature 0...40 °C (32... 104°F)
Air humidity 5...90% (non-condensing)
Class 3K5
Temperature 0...50 °C (32... 122°F)
Air humidity 5...90% (non-condensing)
Mechanical ambient conditions
Transport to EN 60721-3-2
Operation per EN 60721-3-3
Class 2M2
Class 3M2
Elevation above sea level Max. 3,000 m above sea level