Data Sheet for Product

Siemens A6V11664139_en--_i

Smart Infrastructure 2022-01-13

Installation

Power is connected to a plug-in screw terminal block.

This connection is not required for Power over Ethernet (PoE).

Commissioning

Touch panels can be commissioned without tools.

All necessary network parameters can be entered directly on the unit.

Each device has a unique identification number to ensure efficient commissioning.

It is also printed on the removable barcode label.

LED display (front side)

Color Activity Function

Green Off Device is not powered

Flashing Start-up or the program is stopped

On Device is operational

Red Off OK

On Program error

Hardware fault

Flashing 1 Hz Wrong or corrupt software

No application loaded

Faulty server-link configuration

Flashes in wink command rhythm Physical device ID

Service button (rear side) (Only for devices with series B and higher, see printing on the device)

Press Description

Short Physical identification on the network (Ethernet)

As per

description

Do the following to reset the device to factory state:

1. Power off the device.

2. Power on the device.

3. Wait until the green LED lights up and turns off again, then press the Service button.

4. Keep the Service button pressed until the green LED lights up, then release the button.

5. Wait until the device has fully started – unconfigured (LED flashes red/green)

Pre-loaded apps are still available. The FW remains unchanged

Maintenance

Cleaning

Touch panels are maintenance free.

Dirt on the display can be cleaned using off-the-shelf display cleaners for smart phones, a

moist rag, and/or off-the-shelf microfiber cloth for monitors or glasses.