Commissioning Instructions

Configuration
Touch panel
6
A6V11604303_en--_e
Restricted 2022-01-28
27 | 36
Table 12: Device settings.
6.4.4 Network port for IP
This section outlines how to edit your network port for IP settings.
1. Select Object view > Device > Infrastructure.
2. In the work area, select to open the Network port for IP properties .
Field
Description
Network number
Range is 0 to 65534.
UDP port
Range is 0 to 65535.
IP address
IP subnet mask
IP default gateway
Enable (IP) DHCP
Yes – Use dynamic IP addressing.
No – Use a fixed IP address.
Device instance number
Range is 0 to 4194303.
Device name
Modify the device name.
Command
Active – Apply the new settings. The device may reboot depending on the settings changed.
Discard changes – Discard your changes and return to the Favorites list.
Restart port – Restart the IP port.
Table 13: Network port for IP settings.