Commissioning Instructions

Configuration
Network
6
A6V11604303_en--_e
Restricted 2022-01-28
21 | 36
③ Device settings
Field
Description
Description
Description of the device. For example, automation station
Object name
Name of the device. For example, AS_4
Instance
Device Instance number
Local date
Current date in DD.MM.YYYY format
Local time
Current local time in HH:MM:SS format
Table 5: Device settings
④ Device about
Field
Description
Model name
Device model. For example, PXC5.E003.
Operation URL
Web address of the device. For example, https://192.168.251.555
Firmware revision
Current firmware loaded into the device. For example,
FW=v02.20.121.1:44;WPC=2.0.8266529;SVS-400.2:SBC=15.01;
Serial number
Lists the serial number of the physical automation station associated with
BACnet device object.
Table 6: Device about
6.2 Network
Use the procedure in this section to modify the IP network settings for a Desigo device.
1. Select Configuration > Network.
2. Use the following table to make selections for each item.
3. Click Apply changes.
 The new settings are applied and saved. The device may reboot depending on the settings modified.
Setting
Description
Configure IPv4
DHCP - use dynamic IP addressing.
Manual - use a fixed IP address. Complete the IPv4, Subnet mask and Router fields.
MAC Address
(Information only) MAC address of the device.
DNS server
Device name on IP
Enable SNMP
Enabled – SNMP monitoring is active.
Disabled - SNMP monitoring is not active.
SNMP read community
Community string that allows reading information from a device.
UDP port grp comm.
UDP port number that the service uses to communicate. Range is 0 to 65535. Default: 47808
(BAC0)
Table 7: Network settings fields.