Commissioning Instructions

Commissioning
4
A6V11604303_en--_e
Restricted 2022-01-28
15 | 36
Setup wizard – Network settings
The device will configure after clicking the blue arrow.
Setting
Description
Configure IPv4
DHCP – use dynamic IP addressing.
Manual – use a fixed IP address. Complete the IPv4, Subnet mask, and
Router fields.
MAC Address
(Information only) MAC address of the device.
DNS Servers
Device name on IP
Name of the device.
Configure SNMP
Enabled – SNMP monitoring is active.
Disabled – SNMP monitoring is not active.
SNMP Community
Community string that allows reading information from a device.
Group communication UDP Port
UDP port number that the service uses to communicate. Range is from 0
to 65535. Default: 47808 (BAC0)
Setup wizard – Finish
Click the green check mark to go to the web interface.