Commissioning Instructions

About this document
Scope
2
A6V11604303_en--_e
Restricted 2022-01-28
11 | 36
2 About this document
2.1 Scope
This manual provides the procedures for installing and commissioning Desigo Touch Panel Clients. It contains
the following sections:
● Overview provides a product overview, including the topology with HTML5.0 Web server.
● Commissioning describes the initial login to an unconfigured device and using the Setup wizard for device
and network setup.
● User interface describes the touch panel browser bar and the Setup & Service Assistant (SSA), which is
used to configure, commission and maintain devices on the building network.
● Configuration outlines how to configure local settings, such as language, time, or the screen brightness for a
touch panel.
● ABT Site outlines tasks that require ABT Site.
● Installation provides information on panel mounting, device power requirements, cabling requirements and
wiring information.
2.2 Target reader
This manual is written for Engineers who are configuring a Desigo Touch Panel Client (PXMx0-1) for use with
an HTML5.0 Web Server.
NOTICE
Desigo Touch Panel Clients are compatible with HTML5.0 Web applications.
Individual tests must be conducted with Desigo Touch Panel Clients and the
HTML5.0 Web Server to verify inter-operational capabilities.
The data displayed on your system may look different than what is shown in this
manual.
2.3 Terms
Term
Definition
Desigo Touch Panel Client
Touch device for communication using an HTML5.0 web server. For example, Siemens
devices PXM30-1, PXM40-1, PXM50-1.
HTML5.0 Web Server
Enables access from a standard Web browser to a specific system and provides its
content in Web pages.
2.4 References
The Desigo Touch Panel Clients Data Sheet (PXM30-1, PXM40-1, PXM50-1) (A6V11664137) is available on
the Internet:
Download center