User Manual
Table Of Contents
- 1 About this document
- 2 Overview
- 3 Plant view
- 4 Alarms
- 5 Scheduler
- 6 List view
- 7 Trends
- 8 Reports
- 9 Documents
- 10 General settings
- Index
List view
Viewing additional data points
6
A6V11211557_en
--_g
41 | 64
The navigation for each system depends on the devices being used. The data
displayed on your system may look different than what is shown in this manual.
Desigo primary and room controllers
● When navigating from Desigo Control Point to SSA:
– The same node is displayed in the SSA Application view if there is an exact match in the hierarchy.
– The last found hierarchy in the path is displayed if there is not an exact match.
– The root of the Application view is displayed if there is no match in the path.
● When navigating from SSA to Desigo Control Point the last selected node is displayed.
Fig. 9: Navigating to SSA from the building hierarchy.
BACnet/IP devices
● When navigating from Desigo Control Point to SSA:
– The last found hierarchy in the path is displayed if there is not an exact match.
– The root of the Assigned devices view is displayed if there is no match in the path.
● When navigating from SSA to Desigo Control Point the last selected node is displayed.
Fig. 10: Navigating to SSA from the Default Site hierarchy.