User Manual
Table Of Contents
- 1 About this document
- 2 Commissioning
- 2.1 Default connection
- 2.2 Initial login
- 2.3 Setup wizard
- 2.4 Discover and assign devices
- 2.5 Subscribing to the time master
- 2.6 Time synchronization of the time master
- 2.7 Registering as a foreign device
- 2.8 Touch panel settings
- 2.9 Operating and monitoring features
- 3 Data point integration
- 4 Graphic features
- 4.1 Plant view Tools
- 4.2 Kiosk graphics
- 4.3 Engineering notations
- 5 Graphics Builder
- 5.1 Overview
- 5.2 Pane tools
- 5.3 Graphics libraries
- 6 Graphics engineering
- 6.1 Using supersample graphics
- 6.2 Optimizing graphics for PXM touch panels and standard devices
- 6.3 Thumbnails
- 6.4 Dashboards
- 7 Advanced functionality
- 8 Tips and tricks
- 8.1 Updates required after a time zone change
- 8.2 APPLY BATCH TAGS
- 8.3 Graphic components within models cannot be modified
- 8.4 A graphic with relative binding that includes data points from different branches of the hierarchy cannot be created at the Root level
- 8.5 Relative hyperlinks cannot be added to a graphic at the Root level
- 8.6 Relative hyperlinks in a graphic are broken if the graphic is engineered offline and then imported to another device
- 8.7 Automatic logout from Desigo Control Point causes Graphics Builder to temporarily stop working
- 8.8 Detection of network interruptions
- 8.9 Cancelling a kiosk log out sequence
- 8.10 Special characters do not display in graphic file names
- 8.11 The color of a graphical component may display incorrectly if the component was copied
- Index
Graphics Builder
Pane tools
5
96 | 195
A6V11604297_en--_g
Configuring an MJPEG image stream
This procedure uses the PROPERTIES and COMPONENTS panes.
1. From the COMPONENTS > COMPONENTS pane, drag-and-drop onto the work area.
2. To get the URL for the MJPEG image stream you want to use, right-click on the image and copy the
address.
– The image at http://www.opentopia.com/webcam/16391 is shown as an example.
3. Select the new MJPEG component.
4. Do the following in the BASIC PROPERTIES pane:
a. Paste the URL of the MJPEG image stream in the Source field.
b.
(Optional)
Enter a value in the Delay (Ms) field to set the update interval of the image.
The greater the Delay (Ms) value, the slower the video updates. A Delay (Ms) value of 0 will stream as fast
as the camera, network, and computer can handle.
5. Click PREVIEW in the upper right corner to display the image stream in the MJPEG component.