User Manual
Table Of Contents
- 1 About this document
- 2 Commissioning
- 2.1 Default connection
- 2.2 Initial login
- 2.3 Setup wizard
- 2.4 Discover and assign devices
- 2.5 Subscribing to the time master
- 2.6 Time synchronization of the time master
- 2.7 Registering as a foreign device
- 2.8 Touch panel settings
- 2.9 Operating and monitoring features
- 3 Data point integration
- 4 Graphic features
- 4.1 Plant view Tools
- 4.2 Kiosk graphics
- 4.3 Engineering notations
- 5 Graphics Builder
- 5.1 Overview
- 5.2 Pane tools
- 5.3 Graphics libraries
- 6 Graphics engineering
- 6.1 Using supersample graphics
- 6.2 Optimizing graphics for PXM touch panels and standard devices
- 6.3 Thumbnails
- 6.4 Dashboards
- 7 Advanced functionality
- 8 Tips and tricks
- 8.1 Updates required after a time zone change
- 8.2 APPLY BATCH TAGS
- 8.3 Graphic components within models cannot be modified
- 8.4 A graphic with relative binding that includes data points from different branches of the hierarchy cannot be created at the Root level
- 8.5 Relative hyperlinks cannot be added to a graphic at the Root level
- 8.6 Relative hyperlinks in a graphic are broken if the graphic is engineered offline and then imported to another device
- 8.7 Automatic logout from Desigo Control Point causes Graphics Builder to temporarily stop working
- 8.8 Detection of network interruptions
- 8.9 Cancelling a kiosk log out sequence
- 8.10 Special characters do not display in graphic file names
- 8.11 The color of a graphical component may display incorrectly if the component was copied
- Index
Graphics Builder
Pane tools
5
A6V11604297_en--_g
91 | 195
5.
(Optional)
Select the gauge and use the BASIC PROPERTIES to modify the End value, Start value or
Title .
BASIC PROPERTIES [➙ 72]
6. Click PREVIEW in the upper right corner to display the gauge updating with the current value.
GRAPHIC INCLUDE
GRAPHIC INCLUDE creates a frame that embeds a graphic into another graphic. For an example, see the
FIN Include Program in the PROGRAMS pane of the Sample room segment graphic.
Configuring a GRAPHIC INCLUDE
This procedure uses the PROPERTIES and COMPONENTS panes.
Get the id of the graphic that you want to display.
Get the id of the target (the site or equip or floor) that the graphic will use.
1. From the COMPONENTS > COMPONENTS pane, drag-and-drop onto the work area and then
select it.
2. Do the following in the BASIC PROPERTIES pane:
a. Enter the id of the graphic that will display in the File Ref field.
b. Enter the id of the target (the site or equip or floor) in the Target Ref field.
c. Set the Auto Load switch to ON to automatically load the graphic within the frame when the main graphic