User Manual
Table Of Contents
- 1 About this document
- 2 Commissioning
- 2.1 Default connection
- 2.2 Initial login
- 2.3 Setup wizard
- 2.4 Discover and assign devices
- 2.5 Subscribing to the time master
- 2.6 Time synchronization of the time master
- 2.7 Registering as a foreign device
- 2.8 Touch panel settings
- 2.9 Operating and monitoring features
- 3 Data point integration
- 4 Graphic features
- 4.1 Plant view Tools
- 4.2 Kiosk graphics
- 4.3 Engineering notations
- 5 Graphics Builder
- 5.1 Overview
- 5.2 Pane tools
- 5.3 Graphics libraries
- 6 Graphics engineering
- 6.1 Using supersample graphics
- 6.2 Optimizing graphics for PXM touch panels and standard devices
- 6.3 Thumbnails
- 6.4 Dashboards
- 7 Advanced functionality
- 8 Tips and tricks
- 8.1 Updates required after a time zone change
- 8.2 APPLY BATCH TAGS
- 8.3 Graphic components within models cannot be modified
- 8.4 A graphic with relative binding that includes data points from different branches of the hierarchy cannot be created at the Root level
- 8.5 Relative hyperlinks cannot be added to a graphic at the Root level
- 8.6 Relative hyperlinks in a graphic are broken if the graphic is engineered offline and then imported to another device
- 8.7 Automatic logout from Desigo Control Point causes Graphics Builder to temporarily stop working
- 8.8 Detection of network interruptions
- 8.9 Cancelling a kiosk log out sequence
- 8.10 Special characters do not display in graphic file names
- 8.11 The color of a graphical component may display incorrectly if the component was copied
- Index
Graphics Builder
Overview
5
66 | 195
A6V11604297_en--_g
This procedure creates a graphic that displays data for an entire facility.
1. Create or open a graphic at an equip level that is located immediately below the desired site.
How semantic tags create structure in the system [➙ 60]
2. Do the following for each component and smart label in the graphic:
– Select the item, right-click and select TOOLS > RELATIVIZE.
The Component binding options dialog box displays.
– In the Top Equip section, select the equip that is located immediately below the desired site.
– Select Relative: By navName and click APPLY.
A relative binding query has been created for the component.
3. Do the following for each component and smart label in the graphic:
– Individually select each component or smart label, right-click and select TOOLS > VIEW BINDINGS.
– Add the siteRef to the binding query and click SAVE. See the following table for more information.
The binding query has been modified for the component.
4. Click and modify the GRAPHIC ON such that the graphic can be opened on the appropriate site or sites.
See the following figure and the GRAPHIC ON binding query [➙ 63] section for more information.
The adjusted bindings work for any site that has the same or similar structures in the building hierarchy.
GRAPHIC ON
Result
site
This graphic can be opened for viewing on any site.
site and navName=="your site name 1" or
navName=="your site name 2"
This graphic can be opened for viewing on either of the specified sites,
which are known to have the same or similar structures in the building
hierarchy.
Table 16: Modifying the GRAPHIC ON.