User Manual
Table Of Contents
- 1 About this document
- 2 Commissioning
- 2.1 Default connection
- 2.2 Initial login
- 2.3 Setup wizard
- 2.4 Discover and assign devices
- 2.5 Subscribing to the time master
- 2.6 Time synchronization of the time master
- 2.7 Registering as a foreign device
- 2.8 Touch panel settings
- 2.9 Operating and monitoring features
- 3 Data point integration
- 4 Graphic features
- 4.1 Plant view Tools
- 4.2 Kiosk graphics
- 4.3 Engineering notations
- 5 Graphics Builder
- 5.1 Overview
- 5.2 Pane tools
- 5.3 Graphics libraries
- 6 Graphics engineering
- 6.1 Using supersample graphics
- 6.2 Optimizing graphics for PXM touch panels and standard devices
- 6.3 Thumbnails
- 6.4 Dashboards
- 7 Advanced functionality
- 8 Tips and tricks
- 8.1 Updates required after a time zone change
- 8.2 APPLY BATCH TAGS
- 8.3 Graphic components within models cannot be modified
- 8.4 A graphic with relative binding that includes data points from different branches of the hierarchy cannot be created at the Root level
- 8.5 Relative hyperlinks cannot be added to a graphic at the Root level
- 8.6 Relative hyperlinks in a graphic are broken if the graphic is engineered offline and then imported to another device
- 8.7 Automatic logout from Desigo Control Point causes Graphics Builder to temporarily stop working
- 8.8 Detection of network interruptions
- 8.9 Cancelling a kiosk log out sequence
- 8.10 Special characters do not display in graphic file names
- 8.11 The color of a graphical component may display incorrectly if the component was copied
- Index
Graphic features
Plant view Tools
4
40 | 195
A6V11604297_en--_g
4.1.6 Importing graphics
1. Select > > Import files.
The Import files dialog box displays.
2. Click Choose files and select the desired *.fst file(s) from your computer.
3. Click Import files to complete the process and click OK to close the message.
4.1.7 Enable / disable graphics and kiosks
Room users can only view graphics and kiosks that have been enabled in the Desigo Control Point device. The
model of Desigo Control Point device determines the total number of graphics and kiosks that can be enabled.
1. Select > > Enable/disable graphics & kiosks.
The Enable/disable graphics & kiosks dialog box indicates how many graphics and kiosks are enabled.
2. Select the graphic(s) or kiosk(s) to be enabled for viewing in the Disabled graphics & kiosks section.
3. Select any graphic(s) or kiosk(s) to be disabled for viewing in the Enabled graphics & kiosks section.
4. Click Apply to enable or disable the selected items and click Close to close the dialog box.
The enabled graphics and kiosks are now available for viewing in the building hierarchy location where they
reside.