User Manual
Table Of Contents
- 1 About this document
- 2 Commissioning
- 2.1 Default connection
- 2.2 Initial login
- 2.3 Setup wizard
- 2.4 Discover and assign devices
- 2.5 Subscribing to the time master
- 2.6 Time synchronization of the time master
- 2.7 Registering as a foreign device
- 2.8 Touch panel settings
- 2.9 Operating and monitoring features
- 3 Data point integration
- 4 Graphic features
- 4.1 Plant view Tools
- 4.2 Kiosk graphics
- 4.3 Engineering notations
- 5 Graphics Builder
- 5.1 Overview
- 5.2 Pane tools
- 5.3 Graphics libraries
- 6 Graphics engineering
- 6.1 Using supersample graphics
- 6.2 Optimizing graphics for PXM touch panels and standard devices
- 6.3 Thumbnails
- 6.4 Dashboards
- 7 Advanced functionality
- 8 Tips and tricks
- 8.1 Updates required after a time zone change
- 8.2 APPLY BATCH TAGS
- 8.3 Graphic components within models cannot be modified
- 8.4 A graphic with relative binding that includes data points from different branches of the hierarchy cannot be created at the Root level
- 8.5 Relative hyperlinks cannot be added to a graphic at the Root level
- 8.6 Relative hyperlinks in a graphic are broken if the graphic is engineered offline and then imported to another device
- 8.7 Automatic logout from Desigo Control Point causes Graphics Builder to temporarily stop working
- 8.8 Detection of network interruptions
- 8.9 Cancelling a kiosk log out sequence
- 8.10 Special characters do not display in graphic file names
- 8.11 The color of a graphical component may display incorrectly if the component was copied
- Index
Graphic features
Plant view Tools
4
A6V11604297_en--_g
35 | 195
4 Graphic features
4.1 Plant view Tools
The Plant view core function provides custom graphical views of the current control within your facility.
Graphics available for viewing in the Plant view are based on the type of binding applied to the graphic the
context of where the user is in the navigation. For example, a room segment graphic with relative binding will be
available for all room segments at the same relative position in the building hierarchy. For more information, see
the Data point binding [➙ 59] section.
This section outlines the following Plant view > > Tools topics:
● Adding a graphic [➙ 37]
● Editing a graphic [➙ 38]
● Removing a graphic [➙ 38]
● Displaying the URL of a graphic [➙ 39]
● Exporting graphics [➙ 39]
● Importing graphics [➙ 40]
● Enable / disable graphics and kiosks [➙ 40]
● Defining graphics as a startup page [➙ 41]